CCBRQ - INTERGARD MASTIC REACTOR, EBA744
- MSDS: CCBRQ
- Manufacturer: INTERNATIONAL PAINT (USA) INC
- Product Name: INTERGARD MASTIC REACTOR, EBA744
- National Stock Number: 8010-00N008990
Product Identification
Product ID:INTERGARD MASTIC REACTOR, EBA744
MSDS Date:08/03/1989
FSC:8010
NIIN:00N008990
MSDS Number: CCBRQ
Responsible Party
US
Emergency Phone: 800-854-6813
Info Phone: 713-682-1711
Cage: 26351
Contractor
Telephone: 800-589-1267/800-854-6813
Cage: 26351
Ingredients
42 @ 20C
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: 1-5%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM
SOLVENT NAPHTHA (PETROLEUM) , LIGHT AROMATIC; (AROMATIC
CAS: 64742-95-6
RTECS: WF3400000
Fraction By Weight: 35-40%
OSHA PEL 100 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
2.1 @ 20C
CAS: 110-43-0
RTECS: MJ5075000
Fraction By Weight: 5-10%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM
POLYAMIDE RESIN
CAS: 37219-83-3
Fraction By Weight: 40-45%
OSHA PEL N/K
ACGIH TLV: N/K
PHENOL,2,4,6-TRIS(DIMETHYLAMINOMETHYL)-;
CAS: 90-72-2
RTECS: SN3500000
Fraction By Weight: 5-10%
OSHA PEL 5 PPM (MFR)
ACGIH TLV: 5 PPM (MFR)
WITH THIS PRODUCT.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:SEVERE IRRITANT. MAY CAUSE
VISION IMPAIRMENT EVEN BLINDNESS. EYES:CORROSIVE. CAUSES
IRREVERSIBLE EYE DAMAGE. SKIN:SEVERE IRRITATION. MAY RESULT IN
DERMATITIS. HARMFUL IF ABSORBED THRU SKIN. MAY CAUSE
SENSITIZATION. INHALATION:SEVERE IRRITATION, DIZZINESS, POSSIBLE
NAUSEA AND VOMITING AND (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:UNCONSCIOUSNESS.
INGESTION:GASTRO-INTESTINAL IRRITATION, NAUSEA, VOMITING, DIARRHEA.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.
First Aid
First Aid:EYES:FLUSH IMMED W/COPIOUS QTYS OF WATER FOR @ LEAST 15 MINS.
GET MED ATTN IMMED. SKIN:REMOVE CONTAMD CLTHG, WASH SKIN W/PLENTY
OF SOAP & WATER. LAUNDER CLOTHES BEFORE REUSE. INHAL:REMOVE TO
FRESH AIR . GIVE ARTF RESP IF NEEDED. GET MED ATTN. INGEST:GET MED
ATTN IMMED. DRINK PROMPTLY MILK, EGG WHITES, GELATIN SOL'N OR
WATER. AVOID ALCOHOL.
Fire Fighting
Flash Point:99.0F,37.2C
Lower Limits:0.9%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
SMOTHER FLAMES W/ONE OF ABOVE EXTING MEDIA. WATER MAY BE USED TO
COOL UNOPENED CNTNRS, BUT MUST NOT (SUPDAT)
Unusual Fire/Explosion Hazard:CLASS IC. CNTNS FLAMM SOLV. DO NOT USE IN
AREAS WHERE SPK/OPEN FLAME ARE PRESENT. ALSO EXPLO MAY OCCUR IF
CONTAMD W/STRONG OXIDIZING AGENTS. CLSD CNTNRS(SUPDAT)
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN BUILDING DESIGNED & PROTECTED
FOR STOR OF LIQS W/NFPA CLASS IC.
Other Precautions:AVOID BRTHG DUST/CHIPS FROM SANDING/BLASTING SURFACES
COATED W/THIS PROD. CHRONIC OVEREXPOSURE TO, AND MISUSE OF,
SOLVENTS HAS BEEN LINKED TO PERMANENT BRAIN & NERVOUS SYSTEM
DAMAGE.
Exposure Controls
Respiratory Protection:IN OUTDOOR/OPEN AREAS WITH UNRESTRICTED VENT,
USE NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIR-BORNE
PARTICLES OF OVERSPRAY DURING SPRAY APPLIC. IN RESTRICTED VENT
AREAS, USE NIOSH/MSHA APPRVD RE SP I/A/W 29 CFR 1910.134 TO
(SUPDAT)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO KEEP TLV &
LEL OF HAZ INGREDS BELOW LIMS SPECIFIED ON PAGE 1. & TO(SUPDAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
SHOWER .
Work Hygienic Practices:REMOVE & WASH SOILED CLTHG BEFORE REUSE. WASH
HANDS BEFORE EATING/SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:BE USED AS EXTING MEDIA. TAKE CARE TO PVNT SPREAD OF
BURNING LIQ W/WATER. CLSD CNTNRS MAY EXPLODE WHEN EXPOS TO EXTREME
HEAT. EXPLO HAZ:MAY EXPLODE WHEN EXPOS TO EXTREME HEAT. RESP PRO
T:REMOVE COMBINATION OF PARTICULATES & VAPS. VENT:REMOVE DECOMP
PRODS DURING WELDING/FLAME CUTTING ON SURF COATED(ING 6)
Chemical Properties
Boiling Pt:B.P. Text:>163F,>73C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:0.924
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT KNOWN
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:48
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARK.
Hazardous Decomposition Products:CO, CO*2, VARIOUS HYDROCARBON
FRAGMENTS NITROGEN COMPOUNDS.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.